Connectors
The components in the «Connector» range are designed to carry control and/or power signals between the different parts of an automated system.
The range includes, among others, the M8, M12, M23 and field bus standards (Ethernet, Profinet, Interbus, etc.).
Connectors
The connector range includes several different types:
The range includes, among others, the M8, M12, M23 and field bus standards (Ethernet, Profinet, Interbus, etc.).
Connectors
The connector range includes several different types:
- field attachable connectors, recommended for small series or bespoke machines with the possibility of connecting the cable oneself.
- receptacles & panel feed-throughs, recommended for flush through mounting (enclosures or cabinets for example).
- extensions (a connector at each end). When the distances and type of connection are known, it is preferable to use standard length extensions (1, 2, 5 or 10 m). Specific lengths are available on request.
- cords, recommended for applications requiring a connector only at one end. Length and construction will vary according to need.
- Y cable connection, when it is necessary to be able to connect two sensors or pre-actuators to a single connector, with a predefined cable length. The Y-cable range includes several connection modes and several wiring schemes.
- T cable connections, a compact solution allowing two sensors or pre-actuators to be connected to the connector.
- adapters
- LED connectors used to indicate states.
- cables
- shielded connectors: the answer to the need to protect sensitive signals (field bus, analogue signals) in environments where there is interference (EMC) can be found in our shielding technologies: continuity of the shielding with a contact or peripheral shielding (continuity with the locking ring, 360° shielding).
- connectors with protective sleeving for the cables.
- connectors with a sleeve to protect against solder splashes.
Special products
Specific solutions can be designed to meet your specifications: cable protection (braided shielding, etc.), made-to-measure junction boxes, specific assemblies (bundles, etc.), etc.
M8 connector series
The M8 connector range includes field attachable connectors, cords, extensions, T and Y cable connections and receptacles. The connectors are available in 3 and 4-contact versions (with or without LEDs). The locking rings can be
nickel-plated brass, teflon-coated brass or stainless steel. A special sleeve is also provided to protect the locking rings against solder splashes.
M12 connector series
The M12 connector range includes field attachable connectors, cords, extensions, T and Y cable connections and receptacles. The connectors are available in 3, 4, 5 and 8-contact versions (with or without LEDs), shielded or nonshielded. The locking rings can be nickel-plated brass, nickelplated zamak, teflon-coated brass or stainless steel. A special sleeve is also provided to protect the locking rings against solder splashes.
M23 connector series
The M23 connector range includes field attachable connectors, cords, extensions and receptacles. The connectors are available in 6, 9, 12 and 19-contact versions. Versions with T and Y cable connections can be made on request.
Solenoid valve or pressure switch connector series
The solenoid valve connector range includes cords, extensions and Y cable connections.
Download details
